Sikaflex-111 Stick&Seal – JUNO – Paints manufacturers since 1927
JUNO – Paints manufacturers since 1927

Products

  1. Inicio
  2. Productos
  3. Repair products
  4. Sealers
  5. Sikaflex-111 Stick&Seal

Sikaflex-111 Stick&Seal

Sikaflex®-111 Stick & Seal is a 1-part, multipurpose
adhesive and sealant with a very broad adhesion and
sealing profile which bonds and seals most construction material substrates. Internal and external use.

An adhesive to bond most construction components
and materials such as:
? Concrete
? Masonry
? Most stones
? Ceramic
? Wood
? Metal
? Glass
? Plastics such as PVC, PA, PET and EPS/XPS
A sealant to seal vertical and horizontal joints.

Uso: Interior-Exterior
Tamaños: Cartridges 290 ML
Rendimiento
100m for 30 mm diametre. And 4 mm thickness.
15 m of cord for a 5 mm diameter. (20 ml per linear meter)
Dilución
Ready to use
Limpieza
Water
Colores
  • Adheres well to a wide variety of substrates without surface pretreatment
  • Adheres to damp concrete
  • Compatible with most substrates, EPS/XPS, building envelope
  • Good mechanical strength
  • Good weather resistance
logo-ce-pinturas-juno__en
CE certification

After the necessary substrate prefortion, prepare the end of the cartridge before or after inserting into the sealant gun then fit the nozzle. Apply in beads, strips or spots at intervals of a few centimetres each. Use hand pressure only to fix the components to be bonded into position before skinning of the adhesive occurs. Incorrectly positioned components can easily be unbonded and repositioned during the first few minutes after application. If necessary, use temporary adhesive tapes, wedges, or supports to hold the assembled components together during the initial curing time. Fresh, uncured adhesive remaining on the surface must be removed immediately. Final strength will be reached after complete curing of Sikaflex®-111 Stick & Seal, i.e. after 24 to 48 hours at +23 °C, depending on the environmental conditions and adhesive layer thickness.