Dynapok Agua Floor 2/C – JUNO – Paints manufacturers since 1927
JUNO – Paints manufacturers since 1927

Products

  1. Inicio
  2. Productos
  3. Paint
  4. Flooring and sports facility paint
  5. Water-based systems
  6. Dynapok Agua Floor 2/C

Dynapok Agua Floor 2/C

A two-pack water-based epoxy enamel. The product is based on epoxy resins with exceptional surface protection offering excellent chemical resistance and hardness. Product highly recommended for poor ventilated areas, avoiding high toxic atmosphere when applied. Fire Retardant Cert. Bfl-s1 and Slip Resistance Cert. Class 3
Meets latest A+ and AgBB VOC specs for clean interior environment.

Ideal where hygiene coating is specified, and essential
for interior spaces with reduced access to ventilation,
where conventional paints with organic solvents would
be toxic. Generally recommended for closed places with poor ventilation.
Especially suitable for use on flooring garages, indoor car parks, industrial buildings. Certified for the food-sanitary industry: floors and walls of hospitals, showers, industrial kitchens. Valid for concrete, pitch, bituminous and slurry surfaces and for the protection of metal surfaces exposed to contact with water, grease, diluted acids or alkalis.

Uso: Interior
Tamaños: 15 Litres, 4 Litres
Acabados
Satin
Rendimiento
8 m²/L/coat
Dilución
Water
Limpieza
Water
Secado
8-10 hours
Repintado
Minimum. 24 hours
Maximum. 3 days
Sólidos en volumen
55%
Espesor
68 microns
Colores
emissions-aplus-pinturas-juno__en
A+ Indoor Air Quality label
agbb-pinturas-juno__en
AgBB evaluation scheme for VOC emissions
slip-resistant-pinturas-juno__en
Class 3 Slip rating certification
epd-system-pinturas-juno__en
EPD
retardant-bfls1-pinturas-juno__en
Fire retardant Bfl-s1
certificate-health-pinturas-juno__en
Food grade/Hygiene certification

Application by brush, roller or spraying.
In closed environment ensure proper ventilation during the drying process to avoid high concentrations of relative humidity which can affect the properties of the product.
The Two-packA and B must be mixed thoroughly in the proportion indicated in TDS. Once mixed allow for 10 minutes induction time before using the mixed product. IMPORTANT: Potlife of mixed paint is 60 minutes. Do not use after this time as paint film have started to cure, which will lead to dull finish and its mechanical and chemical characteristics will be poor.
For more information, consult the FT.