Metallic Aluminium RAL 9006 – JUNO
JUNO

Products

  1. Inicio
  2. Productos
  3. Industrial/Protective
  4. Metalized enamels
  5. Metallic Aluminium RAL 9006

Metallic Aluminium RAL 9006

Metallic antioxidant enamel.
Formulated based on urethenated resin in combination with aluminium.

Especially recommended as a finish for all kinds of metal surfaces with good anticorrosive properties. Very waterproof and excellent resistance to humidity. Leaves a smooth and shiny finish.

Uso: Interior-Exterior
Tamaños: 4 Litres
Acabados
Gloss
Rendimiento
17 m²/l
Dilución
Thinner D-16
Thinner D-40
Secado
6-12 hours, thickness dependant
Repintado
24 hours
Sólidos en volumen
48%
Espesor
28 microns
Colores
  • Easy application
  • Good opacity.
  • Metallic finish
  • Anti-corrosive properties.
  • Good humidity resistance.

Brush/roller application: D-16. Spraying: D-40
Surfaces to be painted must be clean, free of rust, grease, oil, moisture, old paint in poor condition, and must be properly primed.
On already painted surfaces, check paint's adhesion. Sand removing all the paint that is not well adhered. For greater protection, it's recommended to apply a coat of MULTI-SUPPORT primer (Prod.Code 27040) or for two-pack systems DYNAPOK 2K PRIMER (Prod.Code 22722).
GALVANIZED SURFACES apply a coat of MULTI-SUPPORT Primer (Prod.Code 27040) or in two components PRIMER DYNAPOK 2/C (Prod.Code 22722).
Stir the contents of the container until completely homogenized.
During the application it should be stirred from time to time to avoid the sedimentation of aluminum particles. Aluminum particles can stain with friction, so for high traffic areas apply a protective varnish.
For more information see technical sheet.