Brush/Roller: Use D-16. For Spraying: Use D-40.
Surfaces to be painted must be clean, free of rust, grease, oil, moisture, old paint in poor condition, and properly primed.
On old surfaces, make sure existing paint is well adhered. Sand/remove poorly adhered paint. For greater protection, we recommend applying a coat of MULTI-SUPPORT primer (Code 27040) or for two-pack paint DYNAPOK 2K PRIMER (Code 22722).
On GALVANIZED SURFACES apply a coat of MULTI-SUPPORT Primer (Code 27040) or for two-pack paint DYNAPOK 2K PRIMER (Code 22722).
Stir the contents of the container until completely homogenized.
During the application stir from time to time to avoid sedimentation of the aluminum particles EXTERIOR ALUMINUM once dry, can stain when rubbed. Due to this it is NOT RECOMMENDED to use it in transit areas such as stairs, handrails, heating, railings etc. For such applications use METALIZED ALUMINUM (Code 05802) or POXEMYC UV ALUMINUM 2/C (Code 8824) instead.
For more information see technical datasheet.