High-temp coating – JUNO – Paints manufacturers since 1927
JUNO – Paints manufacturers since 1927

Products

  1. Inicio
  2. Productos
  3. Industrial/Protective
  4. High-temperature enamels
  5. High-temp coating

High-temp coating

Enamel based on silicone resin and acrylic resin pigmented according to colour.

Recommended for the protection of metal elements for prolonged periods of time at temperatures up to 200ºC.
Suitable on commercial and industrial metal/metallic surfaces and structures – ranging from heat treatment applications, including incinerators and furnace chimneys, to pipework and vessels in chemical processing plants. Delivers high-performance humidity resistance and anti-corrosive protection of steel structures in marine and industrial atmospheres provided it can be forced dried at temperatures of 200ºC for 30 minutes.

Uso: Interior-Exterior
Tamaños: 15 Litres, 4 Litres
Acabados
Gloss
Rendimiento
13 m²/l
Dilución
Thinner D-17
Secado
30 minutes
Repintado
24 hours
Sólidos en volumen
40%
Espesor
35-40 microns
Colores
  • Resistant to temperatures up to 200°C
  • Leaves a smooth and shiny surface
  • Good opacity.

Application with brush, conventional sprayer or airless equipment.
NEW IRON AND STEEL.
Abrasive blasting up to Sa 2 ½ grade according to ISO 8501-1 standard, leaving a roughness profile between 20-50 µ. Primem immediately using ZIAMAR E.T. ZINC SILICATE 2K (Code 25700).
STEEL-IRON PRIMED.
Loose/flaking paint must be removed using wire brush, scraper, abrasives. Previous shotblasting Sa 2½ is recommended. Then apply a suitable primer. Stir the contents of the container until completely homogenized.
Apply to clean surfaces, completely dry, free of efflorescence (saltpetre) and mould.
For more information consult TDS.