2/C Dynapok HB Micáceous Grey 2/C – JUNO
JUNO

Products

  1. Inicio
  2. Productos
  3. Industrial/Protective
  4. Floors and pavement
  5. Floor Topcoats
  6. Epoxies
  7. 2/C Dynapok HB Micáceous Grey 2/C

2/C Dynapok HB Micáceous Grey 2/C

2-pack high solids micaceous epoxy coating.
Formulated with iron oxide pigment for excellent barrier protection effect between coats.

Recommended as a midcoat in epoxy and polyurethane systems in environments subject to aggressive or marine atmospheres. Due to its high content of micaceous iron oxide and the roughness of the surface, it provides an excellent anchoring base even after several months of base coat application.
It can also be applied as a primer coat where a high anticorrosive protection is not necessary.

Tamaños: 15 Litres, 4 Litres
Acabados
Matt
Rendimiento
5,6 m²/l
Dilución
Thinner D-90
Limpieza
Thinner D-90
Secado
3 hours
Repintado
12 hours
Sólidos en volumen
56%
Espesor
100 microns
Colores
  • Very good chemical resistance
  • Hard finish
  • High impermeability barrier effect
  • Complies with standard 48295: 2003
  • Complies with UNE 48272: 2003 (Intermaiate Repaint Part)

Brush, roller, conventipnal and airless sprayer.
NEW IRON AND STEEL: Abrasive blasting up to Sa 2 ½ grade according to ISO 8501-1 standard.
MAINTENANCE WORK: Remove loose and flaking paint.
Stir component A in its container and once homogenized add component B slowly to it (in the indicated proportions), while mechanically stirring at low speed. Shake for 2 minutes until perfectly homogenized. Let the mixture rest for 10 minutes. Do not use after exceeded potlife. (8 hours after mixing components A+B).
For more information consult TDS.