Pavimyc 2/C – JUNO
JUNO

Products

  1. Inicio
  2. Productos
  3. Paint
  4. Flooring and sports facility paint
  5. Solvent-based systems
  6. Pavimyc 2/C

Pavimyc 2/C

Two-pack epoxy enamel, with excellent hardness and adhesion properties. Ideal for surfaces that require a smooth and shiny finish. Ensures effective protection against carbonation of concrete. Good coverage and easy to apply product. Pavimyc offers resistance to acids, alkalis and solvents, and provides erosion protection to concrete pavements exposed to heavy traffic chemical attacks, aggressive cleaning systems, etc.

Product widely used on concrete floors in industrial
and non-industrial settings. Ideal for indoor car parks,
laboratories, chemical and pharmaceutical facilities,
mechanical workshops, etc. Not recommended for use
on asphalt, tar or bitumen treated surfaces.

Uso: Interior
Tamaños: 15 Litres, 4 Litres
Acabados
Gloss
Rendimiento
Color: 6 m²/L por coat
Incoloro: 8 m²/L por coat
Dilución
Thinner D-90
Limpieza
Thinner D-90
Secado
5-6 Touch dry
Repintado
Minimum. 12 hours
Maximum. 24 hours
Sólidos en volumen
45-50%, depending on colour
Espesor
40 microns
Colores
  • Prevents premature deterioration of concrete and its creation of dust.
  • Seals, waterproofs and protects concrete pavements against spills of different types of liquids.
  • Facilitates the cleaning of any type of superficial stains.
  • Increases hardness and resistance against abrasion.
  • Excellent penetration capacity sealing the concrete pore, which togetherwith the strong adhesion of the epoxy resins, provides very goodanchoring.
  • Comes in colors with excellent opacity and coverage.
  • Protects concrete pavements from eroding when subjected to intensetraffic, chemical attacks, tough cleaning systems, etc.
slip-resistant-pinturas-juno__en
Class 3 Slip rating certification
epd-system-pinturas-juno__en
EPD

Short-pile roller, brush or spraying. Apply 2 coats. First coat diluted 15%, and second coat 10%.
Stir component A in its container before adding component B slowly to it while stirring the paint mechanically at low speed. Stir for an additional 2 minutes. Leave to rest for 30 min. induction time. Potlife 8 hours after mixing component A+B.
For more information consult TDS.