Imprimax 2/C Primer – JUNO – Paints manufacturers since 1927
JUNO – Paints manufacturers since 1927

Products

  1. Inicio
  2. Productos
  3. Paint
  4. Flooring and sports facility paint
  5. Solvent-based systems
  6. Imprimax 2/C Primer

Imprimax 2/C Primer

Two-pack synthetic floor epoxy primer.
Silane-modified epoxy-polyamide reinforcing primer
providing class-leading adhesion on smooth non-porous
surfaces, like power-floated concrete and tiles.
For interior use.

Product widely used on concrete floors in industrial
and non-industrial settings. Ideal for indoor car parks,
laboratories, chemical and pharmaceutical facilities,
mechanical workshops, etc. Not recommended for use
on asphalt, tar or bitumen treated surfaces.

Tamaños: 15 Litres, 4 Litres, 1 Litre
Acabados
Gloss
Rendimiento
17,5 m²/L/coat
Dilución
Do not dilute.
Limpieza
Thinner D-90
Secado
4-6 Touch dry
Repintado
Minimum. 8 hours
Maximum. 48 hours
Sólidos en volumen
37% ± 2% Theoretical
Espesor
20 microns DFT
Colores
  • Seals and consolidates concrete surfaces
  • Improves adhesion for subsequent layers
  • Guarantees a uniform finish
  • Easy application

Brush or roller. During application and curing time the temperature should be kept above 15ºC.
First stir component A thoroughly in its can, then add component B slowly to it while stirring mechanilcally at low speed. Keep stirring for 2 minutes. Do not use after product's potlife (120 minutes) has been exceeded. For more information consult TDS.